STANDARD FEATURES for HOME ELEVATOR

Features

Descriptions

Car Light and Fan automatic shut off

Elevator can be installed an energy saving features with automatically switch off the internal lighting and exhaust fan when calls are registers after predetermined period of time

Finishing

Tempered Glass with frame

Safety Door Lock

When the door does not close properly, the elevator will stop operating

Overload Device

The Car Overload Device prevents the elevator doors from closing while a lift is loaded beyond its rated load capacity and simultaneously sounds a warning buzzer as well as providing visual indication.

Exhaust fan

For the ventilation inside the car on the top of ceiling

Light

Lighting inside the car on the top of ceiling

Out of Service switch in Car

The Elevator can be use manual for maintenance

Top of Car Inspection Unit

Allows technicians and inspectors to safely ride on top of the lift by giving them total control of the lift. The lift can be driven independently at slow speed to allow inspection and service

Automatic Parking

When service of elevator is stopped, any floor can be selected to park elevator (main floor and upper floor). This allowing more efficient service to future hall calls

Anti Fall Device

When the cage running up and down on the mast section, suddenly the wire rope or other connection device is broken and the cage falls in a weightless environment, anti-falling safety device will automatically fasten on both sides of mast section to prevent it from falling and ensure safety

OPTIONAL FEATURES for HOME ELEVATOR

Features

Descriptions

Automatic Rescue Devices (ARD)

During the normal power failure, the ARD converts stores energy from it bank of rechargeable batteries to the nearest floor and open the door to let passenger out

Fireman Emergency Operation

Fire Emergency Operations that is started in case of fire Operation Switch located in a hall. After the car has arrived at the Return Floor, the car can be used exclusively for firefighting and rescue operations

Car Arrival Chime

A chime to indicate that a car will soon arrive to inform waiting passengers at each floor

Car Call Canceling

A function where Car Calls that have been made for bypassed floors and are still effective when the car arrives at the last floor are regarded as mistakes and collectively cancelled

Operating by Emergency Power (Source – Automatic)

Emergency Operation where elevators are operated with an emergency power source during power failure using the building generator. When the elevators car arrives at the specified floor, the door will open to allow passenger out and then elevator will shut down

Interphone

When the alarm/emergency signal button inside the car is pressed, the elevator telephone automatically establishes a connection with the alarm center or a pre-programmed alarm recipient. At the same time, the position of the emergency call device is communicated

Control Function of ID Card

For special requirement, the ID card can be used to identify the status of passenger, and also, it can be used for timing charge

Hall Lantern

Hall Lantern on each floor will flash to indicated elevator car arrival and service direction to passengers waiting at the elevator lobby

Car Light and Fan automatic shut off

Elevator can be installed an energy saving features with automatically switch off the internal lighting and exhaust fan when calls are registers after predetermined period of time

Automatic Parking

When service of elevator is stopped, any floor can be selected to park elevator (main floor and upper floor). This allowing more efficient service to future hall calls

Supervisory Panel

This is a monitoring panel located in the security room that displays the status of all the elevators operating in the building including flooring location, travelling direction, in/out of service etc